Unpleasing or collapsible splashes can make the bathtub look dirty after it has been thoroughly cleaned. How about a pie? This marvelous contour is also important to see. As you see, it will be again and again. Fortunately, there are ways to clean up the spills from the bath effectively.
Content< i class="rbi rbi-angle-down">What are the rings on the bathtub? How to clean bath rings using additional commercial cleaning products How to remove bath rings using an additional detergent How to clean bath rings using natural ingredients How to avoid recurrence appear ring by the bath
WomanEL will share with you simple tricks that work effectively. You can transfer to this place yourself.
What does the ring on the bathtub scream?
Without regular cleaning, a light outline may appear on the inner surface of the bathtub, which is important to remove. According to Vanesa Amaro, TikTok's “queen of tidying up” and a Clorox spokeswoman, bath rings are usually a drink of water, fats, waste and mineral deposits from hard water.
“When the water It is evaporated, it removes any excess that may stick to the surface of the bath,” says Amaro. Containers for keeping an eye on the body or replacing a forgotten hairpin can also deprive the rings and traces of the iron.” Regular cleaning of the bathtub will help change the thickness of the ring.”
- Do not use abrasive bathtub cleaning tools (especially acrylic, porcelain, or fiberglass) to remove debris such as smudges or smudges.
< h2 id="%d1%8f%d0%ba-%d0%bf%d1%80%d0%b8%d0%b1%d1%80%d0%b0%d1%82%d0%b8-%d0%bf% d0%bb%d1%8f%d0%bc%d0%b8%d0%b a%d1%96%d0%bb%d1%8c%d1%86%d1%8f-%d0%b7-%d0%b2%d0%b0%d0%bd%d0%bd%d0%b8-%d0 %b7%d0%b0-%d0%b4%d0%be%d0%bf" class="rb-heading-index-1 wp-block-heading">How to remove rings and splashes from the bath using other commercial cleaning products
Remove rings and splashes from hard water, fungus blooms using other commercial cleaning products, such as Suitable for hard surfaces or especially for baths. Please read the instructions carefully before using this article.
- Clean the bathtub. Remove all shampoos and other items from the bath to avoid chaos. This will prevent wastage of cleaning agents on the bathtub. And you can thoroughly clean all surfaces that would otherwise be covered with them.
- Saw to clean. Amaro recommends powdering the mixture for cleaning at a distance of 10-15 cm from the bath, especially on clogged areas. Let sit for at least 30 seconds.
- Clean, rinse and dry. Gently wipe the area with a non-abrasive sponge, and then rinse. If necessary, repeat the procedure. Dry the bathtub with a paper towel or a microfiber towel to prevent the appearance of water stains and stains.
Do you think it’s dark and quiet in the booth? Possibly, the problem is that you have made a lot of peace in the light.
How to remove rings from the bathtub with the help of a cleaner
The bath cleaner not only cleans the bathtub, but also disinfects it, like Amaro. Be careful when working with disinfectant – wear rubber gloves, a mask and dry eyepieces. Never mix detergent with other household products and always follow the instructions for the product.
Do not use detergent for acrylic or colored bathtubs, otherwise you may Pozkoditi pokrittya ta zoblennya.
- Clean the bathtub. To ensure that all your bathing materials are not wasted in the washcloth, clean them up before tidying up.
- Mix the ingredients together. Mix the mixture of liquid remover with ⅓ bottle of liquid remover with 3.7 liters of water and place it in an empty bowl with a bottle.
- Sprinkle and let sit. Sprinkle some soap and water directly onto the bathtub and let it soak for at least 6 lengths for further disinfection.
- Clean, rinse and let dry. Wipe the dirty bathtub area with a non-abrasive sponge or microfiber towel. Carefully rinse off the soap with warm water and pat the bath dry with a microfiber towel.
How to clean up the splashes from the bath for natural help Ingredients
Natural ingredients such as baking soda, white citrus and water peroxide can remove stains just as well as commercial cleaning products. In addition, they may be a more accessible cleaning option and, perhaps, you already have a mosquito.
- Clean the bathtub. As in other situations, remove all items from the bathtub to clear the area for cleaning and protect items.
- Mix and apply cleaning paste. Mix three parts of grub soda with one part of white water or water peroxide to create a self-sufficient and effective paste for cleaning. Apply the paste to the rough patch and apply for 30 minutes.
- Scrub and rinse. Using a non-abrasive sponge, rub the paste into the patch to remove rings. Gently knead the paste, and then dry it with a microfiber towel.
- Soak in otti (unnecessarily language). If there are no splashes, fill the bath with hot water, add 3-5 cups of white milk and pour over the wounds for about a year. Ocet will help to remove excess stains and mileage. Pour water and rinse the bathtub, and then dry it with a microfiber towel.
How to prevent your bathtub ring from appearing again
After all this work, you won’t want to wipe your stains again, which is important to note. Amaro recommends maintaining a frequent and consistent cleaning schedule to help prevent the rings from reappearing.
“The more frequently you clean, it will be easier to keep the bath free from spills, rings and streaks. “I recommend cleaning high-traffic areas, such as the bathroom, including the bathtub, about once a week,” says Amaro. “If you don’t scrub the bathtub often, I recommend sprinkling some powder on it to clean and rinse the bathtub.”
Do you have a squeegee in your home? It's important to keep an eye on them. Ale with these lifehacks you will get into trouble.